RTP Cat and Coffee Lineup Sublimation Transfer, Coffee Books Transfer, Ready to Transfer Sublimation

RTP Cat and Coffee Lineup Sublimation Transfer
This order is for Sublimation transfer print only, no shirt or mug or any other item is included in the order.

***Actual colors may vary/differ from the picture as monitor screens are different**

♥ ♥IMPORTANT!!!!!!!!♥ ♥
Measurements of the image is measured from the longest side of the image and the other side is locked, so that not to distort the image.

If you would like a Full sheet 8" x 10.5" depending on the image and the direction you need it please email me and I will be happy to see if I can create a listing for you.

♥ ♥IMPORTANT♥ ♥ SHIPPING INFO!!!!!!!!♥ ♥
Sublimation Transfers will be sent in an envelope with a regular postage stamp.

♥ ♥IMPORTANT!!!!!!!!♥ ♥NAME ADDING INFO!!!!!!!!♥ ♥
IF you want to ADD a name to the Design, the name will be cut on a separate transfer sheet, which will be at the same size or just a bit smaller (in width) depending on the name size, of the design you are ordering. So you will get 2 pieces of paper.

♥ ♥IMPORTANT!!!!!!!!♥ ♥USING the TRANSFER♥ ♥
To use Sublimation transfers on shirts, :

Sublimation Transfer require-
-This transfer must be used on at least 50% or higher polyester shirts, although I recommend at least 65%
-50% poly will give a vintage look
-Lighter fabric or bleached works best
-For BEST RESULTS use 100% polyester white shirts
-Dark fabric cannot be used as-is, the ink will not show (bleaching or vinyl needs to be used on dark or black t-shirts)
-White areas on the transfer will not print, these are 'blank' areas and will be the color of the t-shirt

Follow your Heat press instructions on pressing a sublimation transfer.

*Sublimation transfers require a HEAT PRESS to be applied. They can not be applied with an iron.

Instructions for Polyester Shirts are as follows (or as your Heat Press instructions say for sublimation transfers) :

Set temperature to 400 degrees Fahrenheit.
Set timer to 45-55 seconds.
Set Pressure at medium.
Lint roll shirt.
Put butcher paper INSIDE the garment to ensure the ink does not bleed through the shirt to the back.
Place transfer face down on garment.
Place butcher paper on top of design that is on the shirt.
Press at 400 degrees F for 45-55 seconds with medium pressure.
Remove paper immediately while hot.

Due to the nature of this item no refunds are offered.
This transfer can also be turned into a Sticker, Waterslide, Totebag, etc,,,

♥PLEASE NOTE♥

♥ Not all my designs are designed by me, if I did not personally design it or if I do not own copyright license to sell part of the design as a digital format, I will not sell it as digital.
♥ However I will be happy to make that design into a Sticker, WaterSlide, Sublimation Transfers, or I can add it onto a button pin, mug, mouse pad, coaster, or tote bag.

**DISCLAIMER**
CraftyDesignCorner Transfers is not responsible for pressing errors. All press temperatures can vary between presses. Follow Directions that are sent With the Transfers, but you may need to adjust your temp and pressing times according to your own personal press.